Fuel Tank Cap - Yamaha MT-10 SP 2016 Owner's Manual

TIP

The ABS performs a self-diagno-
sis test each time the vehicle first
starts off after the key is turned to
"ON" and the vehicle has traveled
at a speed of 10 km/h (6 mi/h) or
higher. During this test, a "clicking"
noise can be heard from the hy-
draulic control unit, and if the brake
lever or brake pedal is even slight-
ly applied, a vibration can be felt at
the lever and pedal, but these do
not indicate a malfunction.

This ABS has a test mode which
allows the owner to experience the
pulsation at the brake lever or
brake pedal when the ABS is oper-
ating. However, special tools are
required, so please consult your
Yamaha dealer.
NOTICE
Be careful not to damage the wheel
sensor or wheel sensor rotor; other-
wise, improper performance of the
ABS will result.
1
2
1. Front wheel sensor rotor
2. Front wheel sensor
1
ECA20100
1. Rear wheel sensor rotor
2. Rear wheel sensor
Instrument and control functions

Fuel tank cap

1. Fuel tank cap lock cover
2. Unlock.
To open the fuel tank cap
2
Open the fuel tank cap lock cover, in-
sert the key into the lock, and then turn
it 1/4 turn clockwise. The lock will be re-
leased and the fuel tank cap can be
opened.
To close the fuel tank cap
4-29
2
1. Push the fuel tank cap into position
with the key inserted in the lock.
2. Turn the key counterclockwise to
the original position, remove it, and
then close the lock cover.
EAU13075
1
1
2
3
4
5
6
7
8
9
10
11
12