Yamaha MT-10 SP 2016 Owner's Manual page 32

Instrument and control functions
1
1
QS
1000 r/min
×
2
56 78
4
09
3
LAP
123 ODO 123456
km/h
MODE - A 1
PWR
4
3
5
1. Lap time
2. Latest lap time indicator "LATEST"
3. Information display item
6
4. Lap number
7
To use the lap timer
1. Short push the wheel switch. The
information display item will flash
8
for five seconds.
2. While the information display item
9
is flashing, rotate the wheel switch
upward. The lap timer will flash for
10
five seconds.
3. While the lap timer is flashing, long
push the wheel switch to activate
11
the lap timer or stop the lap timer.
4. When the lap timer has been acti-
12
vated, press the
start the lap timer.
TIP

The engine must be running to use
12 : 00
the lap timer.

2
Set the information display to
LATEST GEAR
FASTEST or AVERAGE for addi-
12
N
tional lap time information.

Accessing the MENU screen will
km
2 1
TCS A-
automatically stop the lap timer.

Whenever the lap timer is stopped,
the current lap will not be record-
ed.

The lap time record can be viewed
and reset from the MENU screen.
/LAP switch to
Warning icons
×
1. SCU trouble warning "
2. Steering damper warning "
3. Coolant temperature warning "
4. Oil pressure warning "
5. Fuel level warning "
6. Error mode warning "Err"
SCU trouble warning "
The suspension trouble warning icon
appears if a problem is detected in the
front or rear suspension.
Steering damper warning "
The steering damper warning icon ap-
pears if a problem is detected in the
steering damper.
4-12
1 2 3 4
QS
1000 r/min
"
"
"
"
"
5 6
12 : 00
E r r
"
"