Yamaha MT-10 SP 2016 Owner's Manual page 31

YRC items MODE/PWR/TCS/ERS
The current MODE (YRC mode) and its
related PWR, TCS and ERS settings
are shown here.
The individual settings for YRC items
PWR, TCS, QSS can be organized into
four groups and set independently for
each group. These groups of settings
are the YRC modes
MODE-B, MODE-C, and MODE-D.
Use the mode switch to change YRC
modes or make YRC item setting
changes from the main screen.
TIP
The YRC modes come preset from the
factory for different riding conditions.

MODE-A is the sportiest setting.

MODE-B is the standard setting.

MODE-C is the touring setting.

MODE-D is the rainy weather set-
ting.
To change YRC modes or make setting
changes
1. Push the "MODE" switch to high-
light the item you want to adjust.
2
1
MODE-A,
1. Mode switch "MODE"
2. Select switch "
2. Use the select switch "
to change the selected item value
(vertical scrolling is not possible).
TIP

Under certain conditions, such as
when the vehicle is in motion, the
throttle grip is turned, excessive
wheel slip is detected, etc., certain
YRC items cannot be adjusted.

When a YRC item is highlighted
but cannot be adjusted, the YRC
item box will return to black.
Instrument and control functions
×
To turn off the traction control system,
select TCS with the "MODE" switch and
/ "
then push and hold the select switch
" or " "
"
turn TCS back on, select TCS OFF and
then press the select switch "
will return to its previous setting).
Lap timer
This stopwatch function measures and
records up to forty laps. On the main
screen, the lap timer shows the current
lap time and lap number (indicated by
the LAP mark). Use the
to mark lap times. When a lap is com-
pleted, the lap timer will show the latest
lap time (marked by the LATEST indi-
cator) for five seconds.
4-11
QS
MODE - A
1000 r/min
LATEST
56 78
12
N
09
LAP
123 123456
ODO
km/h
km
A 1 2
MODE -
PWR TCS A-
" until TCS OFF is displayed. To
/LAP switch
1
12 : 00
2
MODE - A
GEAR
3
4
1
5
6
7
" (TCS
8
9
10
11
12