Table of Contents
Advertisement
en Familiarising yourself with your appliance
Control
Buttons and display
Function selector
Buttons and display
You can use the buttons to set various functions for your appliance. The display shows the settings.
If a function is active, the corresponding symbol lights up on the display.
Symbol
Function
Childproof lock
Time-setting options
Minus
Plus
Types of heating and functions
To ensure that you always find the right type of heating to cook your food, we explain the differences and applica-
tions below.
Symbol
Type of heating
3D hot air
Hot air gentle
12
Explanation
The buttons are touch-
sensitive surfaces. To se-
lect a function, simply
press lightly on the relev-
ant field.
The display shows sym-
bols for active functions
and the time-setting op-
tions.
→ "Buttons and display",
Page 12
Use the function selector
to set the types of heating
and other functions.
You can turn the function
selector clockwise or anti-
clockwise from the zero
setting .
Depending on the appli-
ance, the function se-
lector can be pushed in.
Press on the function se-
lector to click it into or out
of the zero setting .
→ "Types of heating and
functions", Page 12
Use
Activate or deactivate the childproof lock.
Select the time , timer , cooking time
To select the individual time-setting options, press several times.
Decrease the setting values.
Increase the setting values.
What it's used for and how it works
Bake or roast on one or more levels.
The fan distributes the heat from the ring-shaped heating element in the back
wall evenly around the cooking compartment.
Cook selected dishes gently on one level without preheating.
The fan distributes the heat from the ring-shaped heating element in the back
wall evenly around the cooking compartment. The food is cooked in phases us-
ing residual heat.
Select a temperature between 120 °C and 230 °C.
Always keep the appliance door closed when cooking.
This type of heating is used to determine the energy consumption in air recircu-
lation mode and the energy efficiency class.
Control
Temperature selector
Hotplate control
only lights up when you change the time.
Explanation
Use the temperature se-
lector to set the temperat-
ure for the type of heating
and select settings for
other functions.
You can only turn the
temperature selector
clockwise from the zero
setting until it offers res-
istance. You cannot turn it
any further than this.
Depending on the appli-
ance, the temperature se-
lector can be pushed in.
Press on the temperature
selector to click it into or
out of the zero setting .
→ "Temperature and set-
ting levels", Page 13
You can use the four hot-
plate switches to control
the output provided by
each individual hotplate.
The symbol above each
of the switches shows
you which hotplate is set
using that switch.
→ "Gas hob selector",
Page 13
and the end time
.
Advertisement
Table of Contents
