Table of Contents
Advertisement
Operating
Sound control
Master / slave mode
Manual operating on the unit
7.4 Settings
Hero Mirror
16
Moving Head
In this mode, the unit follows the rhythm of the background music or sounds
detected by the built-in microphone.
1.
Press [SET] to activate the main menu.
2.
Press [UP] or [DOWN] until the display shows 'Running Mode' and confirm with
[SET].
3.
Press [UP] or [DOWN] until the display shows 'Sound' and confirm with [SET].
4.
Press [UP] or [DOWN] to select the desired submenu or the desired value and
confirm with [SET].
The following sub menus are available:
Menu level 3
Menu level 4
'Program'
Program 8'
'Sensitivity'
ð The device plays the selected show in an endless loop.
To use a device as the master device, select one of the automatic programmes, acti‐
vate the sound control or the manual control. Connect the slave devices to the DMX
output of the master device and select the DMX mode.
In the 'Running Mode' menu, you can make manual settings for the device parame‐
ters.
1.
Press [SET] to activate the main menu.
2.
Use [UP] or [DOWN] until the display shows 'Running Mode' and confirm with
[SET].
3.
Use [UP] or [DOWN] to select the menu item 'Manual Control' and confirm with
[SET].
4.
Use [UP] or [DOWN] to select the desired parameter and confirm with [SET].
The following sub menus are available:
Menu level 3
Menu level 4/5
'PAN'
'TILT'
'Pan/Tilt Speed'
'TILT rotation'
Use the 'Setting' menu to adjust the basic device parameters.
1.
Press [SET] to activate the main menu.
2.
Use [UP] or [DOWN] until the display shows 'Setting' and confirm with [SET].
Description
'Program 1...
Sound controlled programme 1...8
'0' ... '100'
Microphone sensitivity from low to
high
Description
'0' ... '540'
Setting the angle of rotation
'0' ... '270'
Setting the angle of inclination
'0' ... '255'
Setting the speed of pan and tilt,
increasing speed
'0' ... '255'
Setting endless rotation of Tilt,
decreasing speed
Advertisement
Table of Contents
