APRILIA eSR2 User Manual page 18

eSRZ
eSRZ
Safe Ride
Zero Start function:
The accelerator is activated once the speed of
travel exceeds 3 km/h.
eSRZ AS
Zero Start function:
The accelerator is activated once the speed of
travel exceeds 3 km/h.
CAUTION
1. Battery Level: The battery level is indicated by
4 bars.
2. Speedometer: Displays the current speed of the
scooter.
3. ODO: Total distance travelled.
4. TRIP: Single trip distance.
5. Lights indicator light.
6. Level 1 – The display will show the pedestrian
symbol.
7. Level 2 - The display will show ECO.
8. Level 3 - The display will show D.
9. Level 4 - The display will show S.
10. Cruise Control: Speed control. It is activated after
the same speed has been maintained for a few
seconds. The display emits a short beep.
11. Unit of measurement of speed: km/h-Mph
1. Speedometer: Displays the current speed of the
scooter.
2. Battery level: status of the remaining charge.
3. Pedestrian mode: it helps pushing the vehicle with
flashing rear light.
4. Turn signal (sx): light on
= left indicator active.
5. Lights: Indicates the status of the scooter's lights
(on or off).
6. Bluetooth: indicates whether or not the scooter is
connected to a device via bluetooth.
7. Cruise Control: Speed control. It is activated after
the same speed has been maintained for a few
seconds. The display emits a short beep.
8. Turn signal (dx): light on: = right indicator active.
9. Speed mode:
Level 1 – light off, pedestrian mode active. Level
2 – green.
Level 3 – white. Level 4 – red
10. Speed measurement unit: displays the speed in
km/h or mph.
11. ODO: shows the total distance travelled.
17