APRILIA eSR2 User Manual page 17

eSRZ AS
Accelerator (A):
• Press down to accelerate. Multifunction button (B):
• Power on and off: long press to turn the scooter on or off.
• Lights: press the button once to turn them on or off.
• Speed level change: press the button twice to select the desired level.
• Change unit of measurement: quickly press 3 consecutive times to change from Km/h to Mph. Turn signals and horn
control (C):
• Turn signals: to activate them, press the switch once to the right or left, depending on the direction to be indicated. To
deactivate the turn signal, move the switch back to the central position.
• Horn: press the button once or several times to activate it. Brake lever (D):
• tighten the lever to brake.
Model Reference picture
eSR2
eSR2 EVO
Tuareg
Zero Start function:
The accelerator is activated once the speed of
travel exceeds 3 km/h.
CAUTION
Symbols
1. Battery Level: The battery level is indicated by
4 bars.
2. Speedometer: Displays the current speed of the
scooter.
3. ODO: Total distance travelled.
4. TRIP: Single trip distance.
5. Lights indicator light.
6. Level 1 - The display shows 1
7. Level 2 - The display shows 2
8. Level 3 - The display shows 3
9. Cruise Control: Speed control. It is activated after
the same speed has been maintained for a few
seconds. The display emits a short beep.
10. Service light: indicates that maintenance is
required by the assistance service
11. Bluetooth light: always on
16