Fb Details - Mitsubishi Electric MELSEC iQ-F Series Manual

FB details

Available device
Target module
FX5UJ CPU module
FX5U CPU module
FX5UC CPU module
High-speed counter module
Basic specifications
Item
Language
Number of steps
The amount of label usage
The number of index register
usage
The amount of file register usage
FB dependence
FB compilation method
FB operation
Processing
• By turning on or off i_bEN (Execution command), the count operation starts or stops.
• When i_bEN (Execution command) is on, the contents of CH1 in operation (Un\G28.1)/CH2 in operation (Un\G68.1) are
output to o_bCountStart (Count in operation flag).
• After i_bEN (Execution command) turns on, o_bOK (Normal completion) turns on when the target channel starts operating.
2 HIGH-SPEED COUNTER MODULE FB
10
2.1 M+FX5-2HC_CountEnable (Count Enable Operation)
Firmware Version
1.060 or later
1.300 or later
1.300 or later
1.000 or later
Description
Ladder diagram
410 steps
The number of steps of the FB embedded in a program depends on the CPU module used, the input/output definitions,
and the options setting of GX Works3. For the option settings of GX Works3, refer to the following.
GX Works3 Operating Manual
• Label: 332 points (Word)
• Latch label: 0 points (Word)
The amount of labels used in the program varies depending on the CPU module used, the device specified in an
argument, and the option setting of GX Works3. For the option settings of GX Works3, refer to the following.
GX Works3 Operating Manual
• Index register: 0 points
• Long index register: 0 points
File register: 0 points (Word)
No dependence
Macro type
Always executed
Engineering tool
GX Works3 Version 1.100E or later
GX Works3 Version 1.100E or later
GX Works3 Version 1.100E or later
GX Works3 Version 1.100E or later