Electrolux CKC826V1 User Manual page 52

Step 1 Turn off the oven and wait until it is
cold.
Step 2 Pull the front of the shelf support
away from the side wall.
Step 3 Pull the rear end of the shelf support
away from the side wall and remove
it.
Step 4 Install the shelf supports in the oppo‐
site sequence.
The retaining pins on the telescopic
runners must point to the front.
11.4 How to use: Catalytic cleaning
The cavity is coated with catalytic enamel. It
absorbs fat during catalysis.
Before the catalytic cleaning remove all accessories.
Step 1
Select Menu / Cleaning
press three times.
Duration: 1 h.The catalytic enamel is self cleaning, do not clean it with a cloth.
11.5 How to remove and install:
Door
You can remove the door and the internal
glass panels to clean it. The number of glass
panels is different for different models.
WARNING!
The door is heavy.
52 ENGLISH
Clean the oven with catalytic cleaning
Step 2
and When the cleaning ends the signal
sounds. The oven turns off.
1
Spots or discolouration of the catalytic
coating have no effect on the cleaning.
When the oven is cold, clean the
oven floor with a wet soft cloth
CAUTION!
Carefully handle the glass, especially
around the edges of the front panel. The
glass can break.
2
Step 3