Table of Contents
Advertisement
Manual Changes
Introduction
Manual Changes
This appendix contains the information required to adapt this manual
to earlier versions or configurations of the HP E4915A/E4916A than
the current printing date of this manual. The information in this
manual applies directly to the HP E4915A/E4916A serial number
prefix listed on the title page of this manual.
To
adapt this manual to your HP E4915A/E4916A, see Table A-l and
Table A-2, and make all the manual changes listed opposite your
instrument's serial number and firmware version.
Instruments manufactured after the printing of this manual may be
different from those documented in this manual. Later instrument
versions will be documented in a manual changes supplement that
will accompany the manual shipped with that instrument. If your
instrument's serial number or ROM version is not listed on the
title page of this manual, in Table A-l, or Table A-2, make changes
according to the
yellow MANUAL CHANGES
supplement.
In additions to information on changes, the supplement may contain
information for correcting errors (Errata) in the manual. To keep
this manual as current and accurate as possible, Hewlett-Packard
recommends that you periodically request the latest
MANUAL
CHANGES
supplement.
For information concerning serial number prefixes not listed on the
title page or in the
MANUAL CHANGE
supplement, contact the
nearest Hewlett-Packard office.
To confirm the ROM version, turn ON the power for the
HP E4915A/E4916A or execute *IDN? on the external controller.
Table A-l. Manual Changes by Serial Number
Serial Prefix or Number
Make Manual Changes
Table A-2. Manual Changes by ROM Version
Version
Make Manual Changes
Manual Changes
A-1
Advertisement
Table of Contents
