Handler Interface (Built-In Comparator Function; Hp E4916A Only) - HP E4915A User Manual

Handler Interface (Built-in Comparator Function; HP E4916A Only)
The HP E4916A has a comparator built into it for easy system
upgrading using a handler. This section describes how to specify
comparator data with keys on the front panel.
Only some of the comparator functions are made available with keys
on the front panel,
lb
make full use of its functions, you need to use
HP-IB commands on an external controller. See HP E4915A/E4916A
Operation Manual for details.
Comparator
Function
Function Available
with Front Panel
Keys
Function Available
with HP-IB
Corresponding
HP-IB Command
Selection of primary Upper and lower Up to 10 BINs
COMPPRI
parameter limits only
Selection of
Yes Yes COMPPRIM
sequence/tolerance
mode
Selection of
Upper and lower Upper and lower COMPSLIM
secondary parameter limits limits
Selection of tertiary Yes during DLD
Yes during DLD COMPSECAUX
parameter measurement
measurement
OUT OF
BINS
BIN1 , BIN2
OUT OF BINS-/*
L
BIN3
BIN9
Sequential Sorting
BIN9
/ BIN3 \
/ BIN2 \
,.,-BINK.. ^
NOMINAL VALUE
Tolerance Sorting
OUT OF
-BINS
Capacitance
-OUT OF BINS
->
Figure 5-9. Sequential and Tolerance Modes
5-28 Applications