Installing The Belt Clip; Connecting To The Phone Line; Testing The Connection; Changing The Dial Mode - Uniden AMWUP758 User Manual

4) Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and
the handset makes good contact with the base charging contacts.
5) Charge your handset at least 15-20 hours before plugging into the phone line.
{ILLUSTRATION}

Installing the Belt Clip

1) Line up the holes on each side of the handset. To attach the belt clip, insert into the holes on each side of the handset. Press
down until it clicks.
2) To remove the belt clip, pull either side of the belt clip to release the tabs from the holes.
<<Insert illustration>>

Connecting to the Phone Line

Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and to a telephone outlet.
{ILLUSTRATION}

Testing the connection

To test your connection, try making a call. If your call connects, the settings are fine. If your call does not connect, check the
following:
1) Check the AC adapter cord. Make sure it is securely connected to the DC IN connector and to a standard AC power outlet.
2) Check to make sure the battery is fully charged. (If you don't see the "battery full" icon, check to make sure the battery is
properly connected.
3) Change dial mode (instructions below).

Changing the Dial Mode

Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most
phone networks use a method called tone dialing, so your phone comes programmed for tone dialing. If your phone company
uses Pulse dialing, you will need to change your phone's dial mode. If you cannot connect to the telephone network, please
follow the steps below to modify your phone's settings:
1) Press the MENU soft key. Select the GLOBAL SETUP menu, and then the DIAL MODE submenu.
2) Scroll [down] to select PULSE. (The initial setting is Tone).
3) Press the OK soft key. You will hear a confirmation tone.
If you ever need to change the dial mode back to Tone, follow the same procedure, but select TONE in step 2.

Basic Setup

Selecting a Language

Your phone supports three languages: English, French and Spanish. Once you select a language, the menus on the phone will
display in that language. The default language is English.
Page 6 of 23