Yamaha YZF-R6 2017 Owner's Manual page 29

4. When you have finished viewing
the lap records you can:
 push the "RESET" button for
one second to delete that
group of lap records.
 push the "SELECT" button
for one second to exit and re-
turn to the lap timer.
Coolant temperature display
1. Coolant temperature display
This display indicates the temperature
of the coolant from 105 °F to 255 °F in
1 °F increments.
If the coolant temperature is between
242 and 255 °F, the coolant tempera-
ture display flashes and the coolant
temperature warning light comes on. If
this occurs, reduce the load on the en-
gine by riding at a moderate pace, at
low rpm, until the coolant temperature
goes down. If the temperature does
not go down, or if the message "HI"
flashes, stop the engine and let it cool.
(See page 8-41.)
TIP
 When the vehicle is turned on, the
coolant temperature display is au-
tomatically selected.
Instrument and control functions
Air intake temperature display
1
1. Air intake temperature display
This display indicates the temperature
of the air drawn into the air intake duct.
Push the "RESET" button to switch the
display between the coolant tempera-
ture and the air intake temperature.
TIP
5-9
 When the coolant temperature is
below 105 °F, "Lo" will be dis-
played.
 When the coolant temperature
display is selected, "C" is dis-
played for one second, and then
the coolant temperature is dis-
played.
 When the air intake temperature
display is selected, "A" is dis-
played for one second, and then
the air intake temperature is dis-
played.
 When the air temperature is below
16 °F, "16 °F" will be displayed.
1
5