Yamaha YZF-R6 2017 Owner's Manual page 27

 display brightness and shift light
control mode
TIP
 To switch the multi-function meter
unit between miles and kilome-
ters, push the "SELECT" button
for one second.
 The "
", "GPS", and "QS" icons
require accessory parts to func-
tion.
Speedometer
The speedometer shows the vehicle's
traveling speed.
Tachometer
1
1. Tachometer
2. Tachometer red zone
The electric tachometer shows the en-
gine speed, as measured by the rota-
tional velocity of the crankshaft, in
revolutions per minute (r/min). When
the vehicle is first powered on, the ta-
chometer needle will sweep once
across the r/min range and then return
to zero.
NOTICE
Do not operate the engine in the ta-
chometer red zone.
Red zone: 16500 r/min and above
Instrument and control functions
Clock and lap timer
1. Clock
The clock uses a 12-hour time system.
To set the clock
2
To switch between the clock and lap
timer
Push and release the "SELECT" button
and the "RESET" button at the same
time.
ECA10032
5-7
1. Turn the key to "ON".
2. Push the "SELECT" button and
the "RESET" button for two sec-
onds. The hour digits will start
flashing.
3. Push the "RESET" button to set
the hours.
4. Push the "SELECT" button, and
the minute digits will start flashing.
5. Push the "RESET" button to set
the minutes.
6. Push the "SELECT" button to con-
firm the settings and start the
clock.
1
5