Yamaha YZF-R6 2017 Owner's Manual page 28

Instrument and control functions
1. Lap timer
The lap timer records and stores up to
20 lap times. The lap time history re-
cords are divided into two groups, "L"
for lap order and "F" for fastest order.
For lap order, the most recent lap is
5
designated L1 (and L19 will become
L20). In the case of fast lap history, any
new fast lap within the top 20 will be in-
serted and the previous F20 will be
pushed out of the history.
To use the lap timer
1. Push the "RESET" button for one
second to set the lap timer to the
counting-ready state (the colon ":"
and period "." will flash).
2. Push the pass switch "
the lap timer.
3. Push the pass switch "
mark the start of each new lap.
4. Push the "SELECT" button to stop
the lap timer.
5. Push the "SELECT" button again
to reset the lap timer (or push the
"RESET" button for one second to
reset the lap timer and set it to the
counting-ready state).
To view the lap time history
1. Push the "SELECT" button for one
second. Lap order history is se-
lected (indicated by "L-20" in the
lower part of the display), or push
the "SELECT" button again to se-
lect fast lap history (indicated by
"F-20").
1
 "L-20" = lap order (most re-
 "F-20" = fastest order (fastest
1. History type (L-20 or F-20)
2. Push the "RESET" button and the
1st lap time of that history group
(indicated by "L1" or "F1") is
shown.
" to start
" to
1. Lap number/Fastest rank
2. Lap time
3. Use the "SELECT" button to scroll
the history in ascending order, or
use the "RESET" button to scroll
the history in descending order.
5-8
cent is L1)
lap time is F1)
1
1
2