Yamaha YZF-R6 2017 Owner's Manual page 70

Periodic maintenance and adjustment
5. Remove the engine oil filler cap,
the engine oil drain bolt and its
gasket to drain the oil from the
crankcase.
2
1
1. Engine oil drain bolt
2. Gasket
TIP
Skip steps 6–12 if the oil filter cartridge
is not being replaced.
6. Remove the shift arm bolt, and
then pull the shift arm off the shift
shaft.
7. Remove the fuel tank breather
8
hose and overflow hose from the
guides.
1
1. Shift arm
2. Shift arm bolt
3. Oil filter cartridge
4. Guide
5. Fuel tank breather hose (U49 models)
6. Fuel tank overflow hose
2
3
4
5
6
8. Remove the oil filter cartridge with
an oil filter wrench.
1. Oil filter wrench
TIP
An oil filter wrench is available at a
Yamaha dealer.
9. Apply a thin coat of clean engine
oil to the O-ring of the new oil filter
cartridge.
1. O-ring
TIP
Make sure that the O-ring is properly
seated.
10. Install the new oil filter cartridge
with an oil filter wrench, and then
tighten it to the specified torque
with a torque wrench.
8-14
1