Table of Contents
Advertisement
19.
If it is necessary to replace the WWAN antenna cables, peel the antennas from the top of the display
enclosure (1), remove the antenna cables from the bottom and sides of the display enclosure (2), and
then remove the antenna cables (3).
NOTE:
The WWAN antennas are available using spare part number L19428-001.
The display enclosure is available using spare part number L14929-001 for models without a WWAN
module and L14926-001 for models with a WWAN module.
Reverse this procedure to reassemble and install the display assembly.
Component replacement procedures
81
Advertisement
Table of Contents
