Operating Basics
Do not use hard disk utilities, including those intended to enhance HDD
access speed. They may cause unstable operation and data damage.
CD-RW (Ultra Speed +) media is not available. If used, data may be lost
or damaged.
Write from the computer's HDD to the CD/DVD. Do not try to write from
shared devices such as a LAN server or any other network device.
Writing with software other than RecordNow! and InterVideo WinDVD
Creator Platinum are not recommended.
When writing or rewriting
Please observe/consider the following when you write or rewrite to a
CD-R/RW, DVD-R/-RW/-RAM or DVD+R/+RW disc.
Do not perform any of the following actions when writing or rewriting:
Do not use shut down/log off and standby/hibernation while writing or
rewriting.
Make sure writing or rewriting is completed before going into
standby/hibernation. Writing is completed if you can open the
DVD-ROM&CD-R/RW or DVD Super Multi drive tray.
Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains, or cars. Do not use an unstable
surface such as a stand.
Keep mobile phones and other wireless communication devices away
from the computer.
Always copy data from the HDD to the DVD-RAM. Do not use
cut-and-paste. The original data will be lost if there is a write error.
4-16
Change users in the Windows XP operating system.
Operate the computer for any other function, including using a
mouse or Touch Pad or closing/opening the LCD panel.
Start a communication application such as a modem.
Apply impact or vibration to the computer.
Install, remove or connect external devices, including the following:
PC card, ExpressCard, SD card, USB devices, external monitor,
i.LINK devices, optical digital devices.
Use the Audio/Video control button to reproduce music or voice.
Open the optical media drive.
Remove the optical media drive from the Slim Select Bay.
User's Manual