Toshiba Tecra M3-105 User Manual page 50

The Grand Tour
TOSHIBA
Presentation button
TOSHIBA Assist
button
Power button
LCD Sensor switch
Do not put a magnetic object close to the switch. The computer will
automatically enter Hibernation mode and shut down even if the Panel
Power Off features is disabled.
2-10
Press this button to change internal display,
simultaneous display, or multi-monitor display.
The default setting is the simultaneous display on
LCD and CRT with resolution of 1024 × 768. When
you press this button twice, the display mode
returns to single display on LCD only. Setting of
multi-monitor display in Windows XP, computer
changes its display mode to the multi-monitor
display on LCD and CRT. You can also return to
single display by pressing this button twice.
The setting of TOSHIBA Presentation button can
be changed through the properties of TOSHIBA
Controls. Display mode is changed to the multi-
monitor display by selecting "Different Image"
(Windows XP only) or to the simultaneous
display on internal and external display by
selecting "Same Image".
Press this button to launch the program
automatically. In power-off, stand-by or
hibernation mode, press this button to start the
computer and launch the program.
You can select the function on TOSHIBA
Controls properties.
The default is TOSHIBA Assist.
Press the power button to turn the computer's
power on and off.
This switch senses when the computer's LCD
display panel is closed or opened and activates
the Panel Power Off/On feature. When you close
the LCD display panel the computer enters
Hibernation mode and shuts down. When you
open the computer's LCD display panel the
computer starts in Hibernation mode. Use the
TOSHIBA Power Saver Utility to enable or
disable this feature. The default is "enabled".
Refer to the TOSHIBA Power Saver Utility and
Panel Power Off/On items in Chapter 1,
features, for details on settings.
Special
User's Manual