Special Features - Toshiba Tecra M3-105 User Manual

Special features

The following features are either unique to TOSHIBA computers or are
advanced features, which make the computer more convenient to use.
TOSHIBA Assist
button
TOSHIBA
Presentation button
Hot keys
Display automatic
power off
HDD automatic
power off
System automatic
Standby/Hibernation
Keypad overlay
Power on password
Instant security
User's Manual
Press this button to launch an application
automatically. The default is TOSHIBA Assist.
Press this button to change internal display,
external display, simultaneous display, or
multi-monitor display.
Key combinations let you quickly change the
system configuration directly from the keyboard
without running a system configuration program.
This feature automatically cuts off power to the
computer's LCD display panel when there is no
keyboard input for a time specified. Power is
restored when any key is pressed. You can
specify the time in the Monitor power off item of
the Basic Setup tab in TOSHIBA Power Saver.
This feature automatically cuts off power to the
hard disk drive when it is not accessed for a time
specified. Power is restored when the hard disk is
accessed. You can specify the time in the HDD
power off item of the Basic Setup tab in TOSHIBA
Power Saver.
This feature automatically shuts down the system
in standby mode or Hibernation mode when there
is no input or hardware access for a time specified.
You can specify the time and select either System
Standby or System hibernation in the System
standby and System item of the Basic Setup tab
in TOSHIBA Power Saver.
A ten-key pad is integrated into the keyboard.
Refer to the Keypad overlay
The Keyboard, for instructions on using the
keypad overlay.
Two levels of password security, supervisor and
user, are available to prevent unauthorized
access to your computer.
A hot key function blanks the LCD screen and
disables the computer providing data security.
Introduction
section in Chapter 5,
1-11