Table of Contents
Advertisement
WARNING
HOT SURFACE HAZARD
Be sure the compressor duct work is
cool before removing it. If the sprayer
was operated recently, it will be very hot
and can cause burns!
Fig. 18
Cooler Repair
1. Follow the Pressure Relief Procedure on
page 2.
2. Loosen the clamp (28) on the hose (29) and
remove the hose from the cooler (27). See Fig. 18.
3. Remove the screws (7) and cooler (27). Clean and
inspect for leaks, dents or plugging with dust. See
Fig. 18.
28
27
A
29
A
7
7082A
308–718
19
Advertisement
Table of Contents
