Cooler Repair - Graco 231–323 Instructions-Parts List Manual

WARNING
HOT SURFACE HAZARD
Be sure the compressor duct work is
cool before removing it. If the sprayer
was operated recently, it will be very hot
and can cause burns!
1. Follow the Pressure Relief Procedure on
page 2.
2. Remove the hopper. See page 5.
3. Remove the screws (17A) and top cover (11). See
Fig. 14.
4. Remove the screws (17B) and back cover (76).
See Fig. 14.
5. Remove the screws (17C) and front cooler cover
(16). See Fig. 14.
6. Loosen the clamp (39) on the hose (51) and
remove the hose from the cooler (44). See Fig. 15.
Fig. 15

Cooler Repair

8
A
39
44
39
B
51
76
17B
Fig. 14
7. Remove the hose (8) from the cooler. See Fig. 15
8. Remove the screws (49) and cooler (44). Inspect
and replace the cooler, if necessary. See Fig. 15.
A
B
11
17A
16
17C
05520
49
05521
308–342 15