Installing The Discharge Cover For Mulching - Toro TimeCutter ZR 4200T Operator's Manual

Figure 11
1. Latch retainer
2. Latch
4. Release the hook-shaped latch on top of the
discharge cover from the pivot rod
5. Angle the metal tab on the discharge cover out
of the slot in the bracket welded to the mower
deck (Figure 12).
Figure 12
1. Discharge cover
2. Metal tab
g293897
3. Discharge cover
(Figure 15).
g230250
3. Bracket on the mower
deck
Installing the Discharge
Cover for Mulching
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and move the
motion-control levers outward to the P
position.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Angle the metal tab on the discharge cover into
the slot in the bracket welded to the mower deck
(Figure 13).
1. Discharge cover
2. Metal tab
4. Pivot the discharge cover back and toward the
deck so that the discharge cover aligns with the
mower deck (Figure
5. On the top of the discharge cover, engage the
hook-shaped latch around the pivot rod of the
deflector assembly
15
ARK
Figure 13
3. Bracket on the mower
deck
14).
Figure 14
(Figure 15).
g230248
g230249