Installing The Discharge Cover For Mulching - Toro TimeCutter ZS 4200S Operator's Manual

Figure 12
1. Discharge cover
2. Metal tab
Installing the Discharge
Cover for Mulching
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and move the
motion-control levers outward to the P
position.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Angle the metal tab on the discharge cover into
the slot in the bracket welded to the mower deck
(Figure 13).
Figure 13
1. Discharge cover
2. Metal tab
4. Pivot the discharge cover back and toward the
deck so that the discharge cover aligns with the
mower deck (Figure
3. Bracket on the mower
deck
ARK
3. Bracket on the mower
deck
14).
g230250
5. On the top of the discharge cover, engage the
hook-shaped latch around the pivot rod of the
deflector assembly
1. Deflector
2. Latch
6. Secure the discharge cover to the deck by
hooking the flexible latch on the discharge cover
into the retainer on the deck
g230248
15
Figure 14
(Figure 15).
Figure 15
3. Pivot rod
4. Discharge cover
(Figure 11).
g230249
g297786