Candy GrandO InfoText GO 108 TXT User Instructions page 27

Start/Pause Button
START
To start a programme press this button once.
The machine will now be sensing the wash load and ask you to please wait.
Example
PLEASE WAIT
SET PARAMETERS
The Infotext panel will then display the time to complete the programme and then the wash
cycle will commence. Infotext calculates the time to the end of the selected programme based
upon a standard 8 Kg load, during the cycle, Infotext corrects the time to that applicable to the
size and composition of the load.
Example
END: 1H:50M
10
WASHING
PAUSE
The programme may be paused at any time during the wash cycle by holding down the
Start/Pause button for about 3 seconds and a beep will sound. A message will appear on the
display to inform you that the programme has been paused.
Example
PAUSED PROGRAM
10
DOOR LOCKED
If you wish to add or remove items during washing, wait 2 minutes until the safety device
unlocks the door.
PAUSED PROGRAM
10
DOOR OPEN
To restart the programme press the Start/Pause button once again. The display will inform you
that the programme will continue.
CANCEL A PROGRAMME
To cancel the programme turn the programme selector dial to the "OFF" position and then select
a different programme. The display will inform you that the programme has been cancelled.
Example
CANCELLED PROGR.
Return the programme selector dial to the "OFF"
position.
90
90
90
52
B "DEGREE OF SOILING" button
By selecting this button (active only on COTTON and MIXED FIBRES programmes) there is a
choice of 3 levels of wash intensity, depending on how much the fabrics are soiled.
Once the programme and wash temperature have been selected the degree of soiling
indicator is automatically set to the minimum allowed; pressing the button increases the level
and the settings for the cycle duration are also adjusted accordingly.
The 3 levels of wash intensity shown in the display are:
< hh : mm >
MINIMUM
Set Programme
The programme end time/delay start options can be used if you want the washing to be ready
at a later time (but within 24 hours).
1. Set delay start
Press delay start/set end time button once and press the hours and minutes buttons (to the left
and right) until the required time is set. The display returns to the programme option if the
button is pressed within 5 seconds.
Press the start button.
To cancel delay start, hold down the button for 5 seconds.
2. Programme end time
Press delay start/set end time button twice and press the hours and minutes buttons (to the
left and right) until the required time is set. When entering the programme end option, the
display will show the minimum time which you can set the programme to end by. This time
may only be extended as you require.
NOTE: When using the delay start/set end time functions, only use detergents and laundry
also via the dispenser drawer. Adding detergents etc. to the drum and then leaving them to
stand for long period of time may damage your laundry.
<<hh : mm >>
MEDIUM
End Time
Delay start/
53
C
<<< hh : mm >>>
MAXIMUM
D