Candy GrandO InfoText GO 108 TXT User Instructions page 24

SET FINAL BEEP
YES
Press ( )
ENABLE MEMORY ?
YES
Press ( )
SET DEMO MODE ?
NO
Press ( )
EXIT MENU?
YES
Press ( )
COTTON
10
<<1:50>>
You are now able to select any wash programme. You can if you wish also set a delay start.
Where more detailed information is required refer to the relevant section from the following pages.
if NO is displayed press ( )
if NO is displayed press the (
always select NO, if YES press (
if NO is displayed press the (
reverts back to the wash programme
90
selected
46
A detailed guide around your Infotext menu
This machine will operate prior to programming the Infotext set up. However, this machine has
Start Delay and Programme End functions and for these functions to work efficiently the
Infotext set must be programmed. This is a simple operation and special care has been taken
)
during manufacture to ensure that the user can operate this machine simply and effectively.
Programming the machine
Infotext needs to be programmed so that the correct clock setting, language and personal
requirements are set. When the machine is turned on and the programme dial is moved away
from the "off" position to the programme selections a welcome message will appear.
)
This message is displayed for a short time while the machine recognises which programme
)
has been selected. When the machine is ready, the programme details will appear on the
display and from here you may now beging programming the machine.
Example
Enter the Menu
Prior to entering the Infotext menu please note you have 30 seconds per operation to make
your selection. Should you run out of time the display will return to the start screen, and you
simply have to re-enter the Infotext menu at continue with the programming.
From this stage the menu can be programmed. Hold down the (
together for 5 seconds or until the beep sounds.
The menu options can be changed by pressing the (
To confirm and enter an option press the (
Set Contrast
To adjust contrast, press the (
The contrast level will decrease to a minimum level for each push of the button and then
increase to the maximum level.
To enter your selection press the (
"Set the language" .
Setting the language
Your washing machine is automatically set to English. If you require another language (it is this
language you will read when utilising the machine) follow this procedure:
Scroll through the language options by pressing the (
language of your choice.
WELCOME
00.00
COTTON
10
90
<<1:50>>
) button.
) button.
) button.
) button and the display will then shown if you wish to
) button until you reach the
47
) and the ( ) buttons