Table of Contents
Advertisement
Press the
X
button to switch to the temperature.
2.
Brackets now appear around the suggested temperature.
7\SHV RI KHDWLQJ
7RSERWWRP KHDWLQJ
ƒ&
Turn the rotary selector to set the desired temperature.
3.
7\SHV RI KHDWLQJ
7RSERWWRP KHDWLQJ
ƒ&
Press the
n
button.
4.
Appliance operation begins. The current time appears in the
status bar.
7RSERWWRP KHDWLQJ
ƒ&
Once the dish is ready, switch the oven off with the
5.
or select and apply a new operating mode.
Opening the oven door during cooking
Operation is suspended. When the door is closed again,
operation resumes.
Pausing operation
Press the
button briefly. The oven is paused.
n
The
symbol flashes. Press the
n
continues.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Cancelling operation
Press and hold the
button until 3D hot air and 160 °C
n
appear. You can now change the settings.
Calling up information
Press the
button briefly. For any information, press the
°
button again briefly. Before the appliance is started, information
is displayed on the types of heating, shelf positions and
accessories. After the appliance is started, you can check the
heating temperature in the cooking compartment.
Setting the cooking time
See section Time-setting options, setting the cooking time.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Recommended settings
If you choose a dish from the recommended settings, the ideal
setting values are already specified. You can choose from
many different categories. You will find recommended settings
for a large number of dishes – from cake, bread, poultry, meat
10
button
%
button again, operation
n
°
and game through to bakes and pre-prepared products. You
can change the temperature and cooking time. The type of
heating is fixed.
You can access the various dishes by navigating through
several selection levels. Try it out and see the range of dishes
for yourself.
Selecting a dish
Press the
!
button.
1.
3D hot air, 160 °C are suggested in the display.
Turn the rotary selector anticlockwise to Recommended
2.
settings.
The first food category appears.
Press the
button to switch to the food category and select
X
3.
the required category by turning the rotary selector.
Move to the next level with the
selector to make the next selection.
The setting for the selected dish now appears. You can
change the temperature, but not the type of heating.
Press the
n
button.
4.
Appliance operation begins. The cooking time is shown
counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
00:00:00. You can cancel the signal early by pressing the
button.
Changing the temperature or grill setting
Turn the rotary selector to change the temperature or grill
setting.
Changing the cooking time
Press the
button and switch to cooking time by turning the
0
rotary selector. Press the
X
to change the cooking time. Press the
Calling up information
Press the
button.
°
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Setting rapid heating
Rapid heating is not suitable for all types of heating.
Suitable types of heating
3D hot air
■
Top/bottom heating
■
HydroBaking
■
Pizza setting
■
Intensive heat
■
Suitable temperatures
Rapid heating will not work if the temperature is set to less than
100 °C. If the temperature in the cooking compartment is only
slightly less than the temperature you have set, rapid heating is
not necessary. It will not switch on.
Setting rapid heating
Press the
button to activate rapid heating. The
c
appears next to the temperature you have set. The temperature
indicator bars start filling in.
Once all the bars are filled, rapid heating is complete. You will
hear a short signal. The
c
in the cooking compartment.
X
button. Turn the rotary
button and turn the rotary selector
button.
0
c
symbol goes out. Place your dish
0
symbol
Advertisement
Table of Contents
