National Instruments PXI-8221 User Manual page 55

Note
Specifications are subject to change without notice.
Safety
Note
For UL and other safety certifications, refer to the product label or the
Product Certification
Electromagnetic Compatibility
Note For the standards applied to assess the EMC of this product, refer to the
Product Certification
Note For EMC compliance, operate this device with shielded cabling.
© National Instruments Corporation
Random vibration
Operating ........................................ 5 to 500 Hz, 0.3 g
Nonoperating .................................. 5 to 500 Hz, 2.4 g
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
section.
This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement, control,
and laboratory use:
• EN 61326 (IEC 61326): Class A emissions; Basic immunity
• EN 55011 (CISPR 11): Group 1, Class A emissions
• AS/NZS CISPR 11: Group 1, Class A emissions
• FCC 47 CFR Part 15B: Class A emissions
• ICES-001: Class A emissions
section.
(with solid-state hard drive)
(Tested in accordance with
IEC-60068-2-64. Nonoperating
test profile exceeds the
requirements of
MIL-PRF-28800F, Class B.)
A-3
Appendix A Specifications
rms
rms
Online
Online
NI PXI-8183 User Manual