Chapter 3
I/O Information
Trigger
NI PXI-8183 User Manual
The TRG connector is the software-controlled trigger connection for
routing PXI triggers to or from the backplane trigger bus.
Figure 3-8 shows the TRG connector location on the NI PXI-8183.
Table 3-8 lists and describes the trigger connector signals.
Figure 3-8. TRG Connector Location and Pinout
Pin
1
2 (Shield)
1
NI PXI-8183
Embedded Controller
Table 3-8. TRG Connector Signals
Signal Name
TRIG
GND
3-10
2
Signal Description
Trigger
Ground
ni.com