Indicator Lights And Warning Lights - Yamaha NIKEN GT 2020 Owner's Manual

Instrument and control functions
"SELECT" switch
This switch is used to make setting
changes within the multi-function me-
ter unit. (See page 3-11.)
3
Drive mode switch "MODE"
See page 3-18 for an explanation of
the drive mode.
EAU84530
Indicator lights and warning
lights
1 2 3 4 5 6
EAU84260
1. Coolant temperature warning light "
2. Neutral indicator light "
3. Left turn signal indicator light "
4. High beam indicator light "
5. Oil level warning light "
6. Engine trouble warning light "
7. Traction control system indicator light "
8. Cruise control indicator lights "
9. Right turn signal indicator light "
10.Shift indicator light "
11.ABS warning light "
12.Immobilizer system indicator light "
EAU4939J
Turn signal indicator lights "
and "
Each indicator light will flash when its
7 8 9 10 8 11
corresponding turn signal lights are
flashing.
Neutral indicator light "
This indicator light comes on when the
transmission is in the neutral position.
12
High beam indicator light "
"
This indicator light comes on when the
"
high beam of the headlight is switched
"
on.
"
"
"
Oil level warning light "
"
This warning light comes on when the
" "SET"
engine oil level is low. To prevent en-
"
gine damage, replenish the engine oil
"
as soon as possible.
"
ABS
Even if the oil level is sufficient, the
"
warning light may flicker when riding
on a slope or during sudden accelera-
tion or deceleration, but this is not a
malfunction. If a problem is detected in
the oil level detection circuit, the oil lev-
3-5
EAU11032
"
"
EAU11061
"
EAU11081
"
EAU11259
"