Usb-C Downstream Connector Usbc2; Usb-A Connector Usb1/Usb2/Usb3; Function Test - HP E27u Maintenance And Service Manual

USB-C downstream connector USBC2

Repair the USB-C connector:
1) Use a hot air gun to melt the solder on the pins from bottom side.
2) Lift the USB-C connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component.

USB-A connector USB1/USB2/USB3

Repair the USB-A connector:
1) Use a hot air gun to melt the solder on the pins from bottom side.
2) Lift the USB-A connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component.

Function test

After repair, be sure to confirm that all functions are working.
Table 4-1:
Test item
18
Function test
Operating description Tool used