Limited Warrenty; New Zealand Telecom Network - DSC Power PC1864 User Manual

Limited Warranty
Digital Security Controls warrants the original purchaser that for a
period of twelve months from the date of purchase, the product shall
be free of defects in materials and workmanship under normal use.
During the warranty period, Digital Security Controls shall, at its
option, repair or replace any defective product upon return of the
product to its factory, at no charge for labour and materials. Any
replacement and/or repaired parts are warranted for the remainder of
the original warranty or ninety (90) days, whichever is longer. The
original purchaser must promptly notify Digital Security Controls in
writing that there is defect in material or workmanship, such written
notice to be received in all events prior to expiration of the warranty
period. There is absolutely no warranty on software and all software
products are sold as a user license under the terms of the software
license agreement included with the product.
assumes all responsibility for the proper selection, installation, oper-
ation and maintenance of any products purchased from DSC. Cus-
tom products are only warranted to the extent that they do not
function upon delivery. In such cases, DSC can replace or credit at
its option.
International Warranty
The warranty for international customers is the same as for any cus-
tomer within Canada and the United States, with the exception that
Digital Security Controls shall not be responsible for any customs
fees, taxes, or VAT that may be due.
Warranty Procedure
To obtain service under this warranty, please return the item(s) in
question to the point of purchase. All authorized distributors and
dealers have a warranty program. Anyone returning goods to Digital
Security Controls must first obtain an authorization number. Digital
Security Controls will not accept any shipment whatsoever for
which prior authorization has not been obtained.
Conditions to Void Warranty
This warranty applies only to defects in parts and workmanship
relating to normal use. It does not cover:
• damage incurred in shipping or handling;
• damage caused by disaster such as fire, flood, wind, earthquake or
lightning;
• damage due to causes beyond the control of Digital Security Con-
trols such as excessive voltage, mechanical shock or water dam-
age;
• damage caused by unauthorized attachment, alterations, modifi-
cations or foreign objects;
• damage caused by peripherals (unless such peripherals were sup-
plied by Digital Security Controls);
• defects caused by failure to provide a suitable installation envi-
ronment for the products;
• damage caused by use of the products for purposes other than
those for which it was designed;
• damage from improper maintenance;
• damage arising out of any other abuse, mishandling or improper
application of the products.
Items Not Covered by Warranty
In addition to the items which void the Warranty, the following items
shall not be covered by Warranty: (i) freight cost to the repair cen-
tre; (ii) products which are not identified with DSC's product label
and lot number or serial number; (iii) products disassembled or

New Zealand Telecom Network

The following is a list of warnings applicable when this equipment is connected to the New Zealand Telecom Network :
General Warning
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with
minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort
of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted
equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services.
Reverse Numbering (decadic signalling)
Decadic signalling should not be used as it is being progressively phased out of the network. DTMF dialling is 100% available and it
should always be used.
Line Grabbing Equipment
This equipment is set up to carry out test calls at pre-determined times. Such test calls will interrupt any other calls that may be set up
on the line at the same time. The timing set for such test calls should be discussed with the installer. The timing set for test calls from
this equipment may be subject to 'drift'. If this proves to be inconvenient and your calls are interrupted, then the problem of timing
should be discussed with the equipment installer. The matter should NOT be reported as a fault to Telecom Faults Service.
D.C. Line Feed to Other Devices
During dialling, this device unit does not provide DC voltage to the series port connection and this may cause loss of memory functions
for the terminal devices (local telephone) connected to T-1, R-1.
General Operation (Ringer Sensitivity and Loading)
This device only responds to Distinctive Alert cadences DA1 and DA2.
repaired in such a manner as to adversely affect performance or pre-
vent adequate inspection or testing to verify any warranty claim.
Access cards or tags returned for replacement under warranty will be
credited or replaced at DSC's option. Products not covered by this
warranty, or otherwise out of warranty due to age, misuse, or dam-
age shall be evaluated, and a repair estimate shall be provided. No
repair work will be performed until a valid purchase order is
received from the Customer and a Return Merchandise Authorisa-
tion number (RMA) is issued by DSC's Customer Service.
Digital Security Controls's liability for failure to repair the product
under this warranty after a reasonable number of attempts will be
limited to a replacement of the product, as the exclusive remedy for
breach of warranty. Under no circumstances shall Digital Security
The Customer Controls be liable for any special, incidental, or consequential dam-
ages based upon breach of warranty, breach of contract, negligence,
strict liability, or any other legal theory. Such damages include, but
are not limited to, loss of profits, loss of the product or any associ-
ated equipment, cost of capital, cost of substitute or replacement
equipment, facilities or services, down time, purchaser's time, the
claims of third parties, including customers, and injury to property.
The laws of some jurisdictions limit or do not allow the disclaimer
of consequential damages. If the laws of such a jurisdiction apply to
any claim by or against DSC, the limitations and disclaimers con-
tained here shall be to the greatest extent permitted by law. Some
states do not allow the exclusion or limitation of incidental or conse-
quential damages, so that the above may not apply to you.
Disclaimer of Warranties
This warranty contains the entire warranty and shall be in lieu of any
and all other warranties, whether expressed or implied (including all
implied warranties of merchantability or fitness for a particular pur-
pose) and of all other obligations or liabilities on the part of Digital
Security Controls. Digital Security Controls neither assumes respon-
sibility for nor authorizes any other person purporting to act on its
behalf to modify or to change this warranty, nor to assume for it any
other warranty or liability concerning this product.
This disclaimer of warranties and limited warranty are governed by
the laws of the province of Ontario, Canada.
WARNING: Digital Security Controls recommends that the entire
system be completely tested on a regular basis. However, despite
frequent testing, and due to, but not limited to, criminal tampering
or electrical disruption, it is possible for this product to fail to per-
form as expected.
Out of Warranty Repairs
Digital Security Controls will at its option repair or replace out-of-
warranty products which are returned to its factory according to the
following conditions. Anyone returning goods to Digital Security
Controls must first obtain an authorization number. Digital Security
Controls will not accept any shipment whatsoever for which prior
authorization has not been obtained.
Products which Digital Security Controls determines to be repair-
able will be repaired and returned. A set fee which Digital Security
Controls has predetermined and which may be revised from time to
time, will be charged for each unit repaired.
19