Unloading Film - Pentax IQZoom160 Operating Manual

UNLOADING FILM 'Renove tbe fUin frooi tke camera in tbe sinde or by uaog your body to shade the camera
1 Rewinding the film
After you have exposed the last frame of the roll,
the lens retracts and the film rewinds automati¬
cally. Then, the motor stops, and ' Q ' blinks as
show n to indicate that the film has been rewound.
• A 24-exposure roll of film lakes about 25 sec¬
onds to be rewound.
• During rewinding, the exposure counter counts
frame numbers in reverse.
• The entire roll of fdm including the film leader
is always rewound into the cartridge to prevent
any part of the film being exposed to light.
2 Unloading the film
To unload the film, open the back cover, and re¬
move the cartridge from the chamber by pulling
the top of the film cartridge out with your finer.
Notes:
• The shutter may be released a frame or two
even after the specified number of frames have
been used up as indicated by the number of
shots shown on the film cartridge. If this oc¬
curs. these extra frames may be lost in the proc¬
essing.
• Never open the back cover until the whole film
roll is rewound.
24