Table of Contents
Advertisement
5 When ( / ) appears in the exposure counter on
the LCD panel, the film automatically stop)s
winding. The indication apptears £is shown
above.
6 If ( f ) blinks on the LCD panel, it means the
film is not properly loaded. Reload the film.
Automatic film speed setting
This camera is designed to use DX-coded films
with ISO rating from 25 to 3200. When any of
these films are loaded, the proper film speed is
automatically set for the camera.
Notes:
• Non-DX coded film cannot be used. If non-DX
coded film is used, the camera automatically
sets the film sp)eed to ISO 25.
• A film with IS0400 film speed is recommended
to get less image blur and to cover more photo¬
graphic situations.
• Use high-speed films with ISO 800 or higher
mainly for shooting indoors or in dimly-lit con¬
ditions.
• The exposure counter indication will remain on
even if the main switch is turned off.
14
Advertisement
Table of Contents
