Advertisement
7 Troubleshooting
The dishwasher is capable of signalling a number of faults through the
simultaneous illumination of several indicator lights, with the following
meanings:
FAULT
E1
E2
E3
E4
E5
E6
E7
E8
E9
E11
If an alarm occurs, the machine stops the current program and indicates the fault.
Alarms E1 and E11 require you to contact the technical assistance service.
Alarm E7 is displayed at the end of the cycle, which is anyway completed, as it
does not affect the operation of the dishwasher.
For all other alarms, proceed as follows: stop the current program, switch off the
dishwasher. Switch on and program the dishwasher again to start the new wash cycle.
If the malfunction persists, contact your authorised Service Centre and
provide it with the fault code.
The contact details of the Technical Assistance Department can be found
on the warranty certificate and the website
The manufacturer reserves the right to make any changes deemed necessary for the
improvement of its products without prior notice.
Istruzioni per l'utente
Acquastop failure (some models only)
Safety level
Water heating fault
Water temperature detection fault
Water intake fault
Water drainage fault
Turbine flow-meter fault (some models only)
Alternate washing system fault
Water intake system fault
Wash pump fault.
Light off
DESCRIPTION
Light on
Light flashing
55
Advertisement
Troubleshooting
