Wireless Lan - Toshiba Satellite M40X-119 User Manual

Toshiba satellite m40x-119: user guide
Table of Contents

Advertisement

Operating Basics
Disconnecting the LAN cable
To disconnect the LAN cable, follow the steps below.
1. Pinch the lever on the connector in the computer's LAN jack and pull
out the connector.
2. Disconnect the cable from the LAN hub in the same manner. Check
with your LAN administrator before disconnecting from the hub.

Wireless LAN

The wireless LAN is compatible with other LAN systems that comply with
the 802.11g wireless LAN standard.
It supports the following:
Automatic Transmit Rate Select mechanism in the transmit range of 54,
11, 5.5, 2 and 1 Mbit/s.
Advanced Encryption Standard (AES) data encryption, based on 128bit
encryption algorithm.
Wake-up on LAN does not function on a Wireless LAN.
Frequency Channel Selection (5GHz and 2.4 GHz)
Roaming over multiple channels
Card Power Management
Wired Equivalent Privacy (WEP) data encryption. Wake-up on LAN
does not function on a wireless LAN.
Wireless LAN Disclaimer
The transmission speed over the wireless LAN and the distance over which
wireless LAN can reach may vary depending on surrounding
electromagnetic environment, obstacles, access point design and
configuration, and client design and software/hardware configurations.
The actual transmission speed will be lower than the theoretical maximum
speed.
To use the Atheros SuperAG™ or SuperG™ function, your client and
access point must support the corresponding feature. Performance of
these functions may vary depending on the format of data transmitted.
4-6
User's Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents