Power Indicators - Toshiba Satellite M40X-119 User Manual

Power and Power-Up Modes
AC adapter Battery capacity
not is above low
connected battery trigger
point
Battery capacity
is below low
battery trigger
point
Battery capacity
exhausted
No battery
installed

Power indicators

As shown in the above table, the Battery, DC IN and Power indicators on
the system indicator alert you to the computer's operating capability and
battery charge status.
Battery indicator
Check the Battery indicator to determine the status of the battery. The
following indicator lights indicate the battery status.
Flashing amber
Amber
Green
No light
6-2
Power on
• Operates
• LED: Battery off
DC IN off
• Operates
• Alarm sounds (depending
on the Low Battery Alarm
itemof CMOS SETUP
menu & TOSHIBA Power
Saver setting)
• LED: Battery flashes
amber
DC IN off
Computer goes into
Hibernation or shuts down
(depending on the
TOSHIBA Power Saver
setting)
• No operation
• LED: Battery off
DC IN off
The battery charge is low. The AC adapter must
be connected to recharge the battery
Indicates the AC adapter is connected and
charging the battery.
Indicates the AC adapter is connected and the
battery is fully charged.
Under any other conditions, the indicator does
not light.
Power off (no operation)
User's Manual