9． Program Diagram - Haier 29T9D Service Manual

a. watching tv
1 2
1
4 5
7 8
0
2
CH+
MENU
VOL-
CH-
TUNE
CH+
MENU
VOL-
CH-
Swap function enables quick swap to the last watched program.
Auto scan function enables automatic successive scanning of all the programs in
memory with "OFF" skip status
15
9. Program Diagram
How to select TV program
Select the desired program
3
1 Using "Program number" buttons
Directly enter the channel number with the numeric keypad
6
on the remote control.
To select channel numbers from 10 ~ 99 press [-/--] button
and enter the two digit channel number
9
To select channel numbers from 100 ~ 218 press [-/--] button
twice and enter the 3 digit channel number
2 Using the CH+/- buttons
Press the CH+ button to select a channel number in number
increasing
Press the CH- button to select a channel number in number
decreasing
Select the desired sound
VOL+
Press the VOL / buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~99. When
the volume buttons are pressed the volume level is
displayed automatically on the TV screen.
If the colour of a channel is abnormal
Usually this should be set in the
Auto position. However if the
colours displayed on the screen
are incorrect you can manually
select the correct colour system.
When finish remember to turn it
back to auto again so that other
programs will still work correctly.
To select the colour change
option press the TUNE button
VOL+
on the remote control.
If picture colo r is abnormal
Use the CH+/- buttons to select Colour then the
VOL-/+ buttons to change between Auto,
SECAM and NTSC443
the setting.
(each channel will last about 2 seconds).
direction.
direction.
- +
u
. Press the EXIT button to save
Program Diagram
TUNE
COLO R U AUTO
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
PAL, NTSC,