Haier 29T9D Service Manual page 24

I. Surround/woofer , mute and NICAM functions
SOUND
1
2
CH+
3
MENU
VOL-
CH-
MUTE
I-II
24
How to use surround / woofer
2 Press the CH+/- buttons
select "SURROUND" /
"WOOFER", then press the
VOL-/+ buttons to turn the
VOL+
SURROUND / WOOFER "ON".
3 Press the CH+/- buttons
select WOOFER VOL, then
press the VOL-/+ buttons to
obtain the desired effect.
Sound mute
1 Press the MUTE button on the
remote control and "MUTE" type
face will display on the lower part
of the screen. At this time, the
sound of the TV set is turned off.
Selecting NICAM & Mono modes
This TV set is fitted with a Stereo Nicam decoder which
allows full high quality stereo sound, plus the standard
FM mono sound to be received. By pressing the I-II
button on the remote control enables the TV set to sound
to be switched between Nicam and Mono reception.
If the broadcaster is transmitting Bilingual sound service
the I-II button on the remote control will allow up to 3
separate languages to be selected.
Note: If the signal is very weak or has too much
interference such as ghosting the TV set will not be able
to receive the NICAM signal.
Program Diagram
SOUND
VOLUME
BASS
TREBLE
BALANCE
WOOFER OFF
WOOFER VOL
SURROUND ON
MUTE
45
48
48
0
20
16