Program Diagram - Haier HTN13R12 Service Manual

9.

Program Diagram

Insert the power plug into the power line socket and insert the antenna plug into the antenna socket
on the rear panel. Press down the power switch of the TV set. The red indicator light goes on.
Program preset
A． 1). Auto searching and storing program
Press MENU button on the remote controller then use the "
program" then press the "
2). Deleting channel number
Press MENU to call Menu. Then use the "
press the "
B．Volume tuning
Press VOLUME buttons VOL - to decrease and VOL+ to increase the volume.
PDF 文件以 "FinePrint pdfFactory Pro" 试用版创建
" to make sure. If you want to stop, press the key "
" to select ADD or DELETE.
Program Diagram
" key to select the bar "Auto
" key to select the bar "ADD/DELETE". then
15
http://www.pdffactory.com
".