Table of Contents
Advertisement
GENERAL INFORMATION
GENERAL INFORMATION
The MQ MB25A Rebar Bender is designed to be used
as a portable on-site rebar bender, capable of bending in-
place rebar to approved American Concrete Institute (ACI)
radius. Labor time and injuries are greatly reduced from
manually bending rebar. The MB25A is capable of bends
up to 180°.
The MB25A comes with 5 rollers and collars which can be
used in different combinations to match the diameter of
the rebar to be bent.
The MB25A comes with a foot switch which can start the
bending procedure with a push of the pedal instead of
pressing the start button.
An emergency button is available to immediately stop the
machine when something goes wrong during bending. The
roller then returns to the starting position.
PAGE 8 — MB25A REBAR BENDER • OPERATION AND PARTS MANUAL — REV. #3 (11/18/08)
Advertisement
Table of Contents
