MULTIQUIP MC64SK Operation Manual
  1. Manuals
  2. Brands
  3. MULTIQUIP Manuals
  4. Construction Equipment
  5. MC64SK
  6. Operation manual
MULTIQUIP MC64SK Operation Manual

MULTIQUIP MC64SK Operation Manual

Concrete mixer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATION MANUAL
MODEL
MC64SK/MC64PK
CONCRETE MIXER
(KOHLER CH395 9.5 HP GASOLINE ENGINE)
Revision #0 (07/20/22)
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

Advertisement

Table of Contents
loading

Related Manuals for MULTIQUIP MC64SK

Summary of Contents for MULTIQUIP MC64SK

  • Page 1 OPERATION MANUAL MODEL MC64SK/MC64PK CONCRETE MIXER (KOHLER CH395 9.5 HP GASOLINE ENGINE) Revision #0 (07/20/22) THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
  • Page 2 @ www.discount-equipment.com Select an option below to find your Equipment We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto, Power Blanket, Nifty Lift, Atlas Copco, Chicago Pneumatic, Allmand, Miller Curber, Skyjack, Lull,...

  • Page 3: Proposition 65 Warning

    PROPOSITION 65 WARNING PAGE 2 — MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22)

  • Page 4: Silicosis/Respiratory Warnings

    NIOSH/MSHA for the materials being used. MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22) — PAGE 3...

  • Page 5: Table Of Contents

    Maintenance (Engine) ........24–27 Maintenance (Mixer) ........27–30 Troubleshooting (Mixer) ......... 31 Troubleshooting (Engine) ......... 32–33 NOTICE Specifications and part numbers are subject to change without notice. PAGE 4 — MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22)

  • Page 6: Training Checklist

    Fuel system, refueling procedure. Operation of controls (machine not running). Safety controls, safety stop switch operation. Emergency stop procedures. Machine transport and storage. MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22) — PAGE 5...

  • Page 7: Safety Information

    Rotating parts hazards CAUTION Indicates a hazardous situation which, if not avoided, COULD result in MINOR or MODERATE INJURY. NOTICE Addresses practices not related to personal injury. PAGE 6 — MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22)
  • Page 8 „ ALWAYS check the equipment for loosened threads or bolts before starting. „ DO NOT use the equipment for any purpose other than its intended purposes or applications. MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22) — PAGE 7...
  • Page 9 Allow these parts to cool before servicing the equipment. „ Make certain the operator knows how to and is capable of turning the engine OFF in case of an emergency. PAGE 8 — MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22)
  • Page 10 Smooth, gradual starts and stops will improve towing. „ ALWAYS make sure forklift forks are inserted as far as possible into the pockets (if applicable) when lifting the mixer. MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22) — PAGE 9...
  • Page 11 Recyclers and manufacturers alike promote the process of recycling metal. Using a metal recycling center promotes energy cost savings. PAGE 10 — MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22)

  • Page 12: Mixer Specifications/Noise And Vibration

    MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22) — PAGE 11...

  • Page 13: Engine Specifications

    1¼ 2½ Foundations 1:3:6 1/3 Bag 1¼ 2½ 2¾ Rough Mass 1:4:8 1/4 Bag 1¼ 2½ 2¾ Concrete Watertight Floors, 1:1½:3 2/3 Bag 1¼ Tanks, Pits, etc. PAGE 12 — MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22)

  • Page 14: General Information

    Torque (ft-lbs) 5/16-inch x 18 OPTIONAL TOWING BARS 3/8-inch x 16 Figure 2. Optional Tow Bars 3/8-inch x 24 1/2-inch x 13 1/2-inch x 13 (Grade 8) MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22) — PAGE 13...

  • Page 15: Basic Components (Mixer)

    Remember to insert the forks of the forklift a minimum of 24 inches into the lift pockets. PAGE 14 — MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22)

  • Page 16: Engine Components

    5. Dipstick/Oil Filler Cap – Remove this cap to determine if the engine oil is low. Add oil through this filler port as recommended in Table 6. MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22) — PAGE 15...

  • Page 17: Towing Guidelines

    3. As a minimum, use a 1/2-inch bolt and nylock nut grade the up position (mouth facing upwards). 5 when securing either tow bar to the towing vehicle. PAGE 16 — MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22)

  • Page 18: Safety Chain Connection

    Secure the loop with the safety your legs to lift. chain connector link. MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22) — PAGE 17...

  • Page 19: Inspection

    Table 6. Engine Oil Type Season Temperature Oil Type Summer 25°C or Higher SAE 10W-30 Spring/Fall 25°C ~ 10°C SAE 10W-30/20 Winter 0°C or Lower SAE 10W-10 PAGE 18 — MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22)
  • Page 20 3. When refueling, be sure to use a strainer for filtration. DO NOT top-off fuel. Wipe up any spilled fuel immediately. CORD FAILURE GLAZED WORN BACK COVER BROKEN MISSING RUBBER CRACKS SIDEWALL WEAR Figure 13. V-Belt Inspection MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22) — PAGE 19...

  • Page 21: Start-Up

    1. Place the fuel shut-off lever (Figure 14) in the ON THROTTLE position. LEVER FUEL VALVE LEVER Figure 16. Throttle Lever FAST SLOW Figure 14. Fuel Shut-Off Lever PAGE 20 — MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22)
  • Page 22 (Figure 18). Pull this button outward to start the engine. Figure 19. Starter Grip PULL OUT TO START START/STOP SWITCH Figure 18. Engine Start/Stop Button MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22) — PAGE 21...

  • Page 23: Operation

    Be careful to only place the tip of the shovel inside the drum. Figure 22. Filling Mixing Drum (WRONG) PAGE 22 — MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22)
  • Page 24 2. Push the engine start/stop switch (Figure 24) inward Figure 25. Fuel Shut-Off Lever (OFF) to stop the engine. PUSH IN TO STOP Figure 24. Start/Stop Button (Stop Position) MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22) — PAGE 23...

  • Page 25: Maintenance (Engine)

    Refer to the KOHLER Shop Manual for service procedures. (3) For commercial use, log hours of operation to determine proper maintenance intervals. (4) NOT required if using KOHLER PRO 10W-50 full-synthetic oil. PAGE 24 — MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22)
  • Page 26 5. Install drain bolt with sealing washer and tighten securely. OIL FILLER DIPSTICK FUEL TANK CAP FUEL STRAINER SEALING DRAIN WASHER BOLT Figure 26. Fuel Strainer Figure 28. Draining Engine Oil MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22) — PAGE 25...
  • Page 27 5. Lift up on the locking latches to secure air cleaner cover to the base. 6. Reassemble the air cleaner, and tighten the wing nut securely. Figure 29. Engine Air Cleaner (Quad-Clean) PAGE 26 — MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22)
  • Page 28 4. If the spark arrester is damaged and has breaks or holes, replace with a new one. 5. Reinstall the spark arrester and muffler protector in reverse order of disassembly. MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22) — PAGE 27...

  • Page 29: Maintenance (Mixer)

    2. ALWAYS disconnect the spark plug wire before cleaning the inside of the drum. 3. Place “DO NOT Operate” tag on mixer. PAGE 28 — MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22)
  • Page 30 Wheel lockup Avoid sudden stops Flat and tire when possible and Spots NOTICE skidding adjust brakes. NEVER use an pneumatic air gun to tighten wheel lug nuts. MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22) — PAGE 29...
  • Page 31 Third Pass Wheel Size FT-LBS FT-LBS FT-LBS 12" 20-25 35-40 50-65 13" 20-25 35-40 50-65 14" 20-25 50-60 90-120 15" 20-25 50-60 90-120 16" 20-25 50-60 90-120 PAGE 30 — MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22)

  • Page 32: Troubleshooting (Mixer)

    Broken V-belt? Replace V-belt. Check that the gears and bearings Defective ring or pinion gears? are not broken. Replace as necessary. Defective electric motor? Replace electric motor. MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22) — PAGE 31...

  • Page 33: Troubleshooting (Engine)

    Air in fuel line? Bleed fuel line. Will not start, no power with key "ON". (if ON/OFF device not in ON position? Place ON/OFF device in ON posotion. applicable) PAGE 32 — MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22)
  • Page 34 Adjust choke valve to correct position. Carburetor defective, seal on carburetor Exhaust color is continuously "black". Replace carburetor or seal. broken? Poor carburetor adjustment, engine runs too Adjust carburetor. rich? MC64SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (07/20/22) — PAGE 33...
  • Page 35 @ www.discount-equipment.com Select an option below to find your Equipment We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto, Power Blanket, Nifty Lift, Atlas Copco, Chicago Pneumatic, Allmand, Miller Curber, Skyjack, Lull,...

This manual is also suitable for:

Mc64pk

Table of Contents