Lexmark XM7355 User Manual page 149

Understanding the printer menus
Menu item
Proposed Encryption Method
3DES
AES*
Proposed Authentication Method
SHA1
SHA256*
SHA512
IKE SA Lifetime (Hours)
1
2
4
8
24*
IPSec SA Lifetime (Hours)
1
2
4
8*
24
IPSec Device Certificate
Pre‑Shared Key Authenticated
Connections
Host [x]
Certificate Authenticated Connections
Host [x] Address[/subnet]
Note: An asterisk (*) next to a value indicates the factory default setting.
802.1x
Note: This menu appears only in network printers or printers that are attached to print servers.
Menu item
Active
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
LPD Configuration
Note: This menu appears only in network printers or printers that are attached to print servers.
Description
Set the encryption method.
Note: This menu item appears only when Base Configuration is set
to Compatibility.
Set the authentication method.
Note: This menu item appears only when Base Configuration is set
to Compatibility.
Specify the IKE SA expiry period.
Note: This menu item appears only when Base Configuration is set
to Secure.
Specify the IPSec SA expiry period.
Note: This menu item appears only when Base Configuration is set
to Secure.
Specify an IPSec certificate.
Configure the authenticated connections of the printer.
Description
Let the printer join networks that require authentication before
allowing access.
149