Lexmark XM7355 User Manual page 139

Understanding the printer menus
Menu item
Adjust ADF Skew
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Flash Drive Print
Menu item
Number of Copies
1–9999 (1*)
Paper Source
Tray [x] (1*)
Multipurpose Feeder
Manual Paper
Manual Envelope
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)*
Sides
1‑Sided*
2‑Sided
Staple
Off*
1 staple, top left corner
2 staples, left
1 staple, top right corner
2 staples, top
1 staple, bottom left corner
2 staples, bottom
1 staple, bottom right corner
2 staples, right
Hole Punch
Off*
2 holes
3 holes
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer to adjust the skewed images from documents that are scanned
from the ADF.
Description
Set the number of copies.
Set the paper source for the print job.
Keep the pages of a print job stacked in sequence, particularly when printing
multiple copies of the job.
Specify whether to print on one side or both sides of the paper.
Specify the staple position for all print jobs.
Note: This menu item appears only when a staple finisher is installed.
Set the punch mode for all print jobs.
Note: This menu item appears only when a staple finisher is installed.
139