Stb Vendor Id - ZyXEL Communications AX Series User Manual

Table 73 Network Setting > Home Networking > Additional Subnet (continued)
LABEL
Subnet Mask
Offer Public IP
by DHCP
Enable ARP
Proxy
Cancel
Apply

10.6 STB Vendor ID

Use this screen to configure the Vendor IDs of connected Set Top Boxes (STBs) so the Zyxel Device can
automatically create static DHCP entries for them when they request IP addresses.
Click Network Setting > Home Networking > STB Vendor ID to open this screen.
Figure 132 Network Setting > Home Networking > STB Vendor ID
The following table describes the labels in this screen.
Table 74 Network Setting > Home Networking > STB Vendor ID
LABEL
Vendor ID 1 – 5
Cancel
Apply
Chapter 10 Home Networking
DESCRIPTION
Enter the public IPv4 subnet mask provided by your ISP.
Click this switch to enable the Zyxel Device to provide public IP addresses by DHCP server.
Otherwise, click to disable.
Click this switch to enable the Address Resolution Protocol (ARP) proxy. Otherwise, click to
disable.
Click Cancel to restore your previously saved settings.
Click Apply to save your changes.
DESCRIPTION
These are STB's Vendor Class Identifiers (DHCP option 60). A Vendor Class Identifier is usually
used to inform the DHCP server a DHCP client's vendor and functionality.
Click Cancel to restore your previously saved settings.
Click Apply to save your changes.
AX/DX/EX/PX Series User's Guide
284