ZyXEL Communications AX Series User Manual page 70

Table 24 Navigation Panel Summary (continued)
LINK TAB
Cellular Backup
Advanced
Backup WAN
Wireless General
Guest/More AP
MAC
Authentication
WPS
WMM
Others
Channel Status
MESH
Home LAN Setup
Networking
Static DHCP
UPnP
Additional
Subnet
STB Vendor ID
Wake on LAN
TFTP Server Name
APAS
Routing Static Route
DNS Route
Policy Route
RIP
QoS General
Queue Setup
Classification
Setup
Shaper Setup
Policer Setup
Monitor
NAT Port Forwarding
Chapter 3 Web Configurator
FUNCTION
Use this screen to configure a cellular WAN connection as a backup to
keep you online if the primary WAN connection fails.
Use this screen to enable or disable PTM over ADSL, Annex M/Annex J,
and DSL PhyR functions.
Use this screen to convert the LAN port as a WAN port, or reset the WAN
port to LAN port.
Use this screen to configure the WiFi settings and WiFi authentication or
security settings.
Use this screen to configure multiple BSSs on the Zyxel Device.
Use this screen to block or allow wireless traffic from wireless devices of
certain SSIDs and MAC addresses to the Zyxel Device.
Use this screen to configure and view your WPS (WiFi Protected Setup)
settings.
Use this screen to enable or disable WiFi MultiMedia (WMM).
Use this screen to configure advanced WiFi settings.
Use this screen to scan WiFi channel noises and view the results.
Use this screen to enable or disable MPro Mesh.
Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Use this screen to assign specific IP addresses to individual MAC
addresses.
Use this screen to turn UPnP and UPnP NAT-T on or off.
Use this screen to configure IP alias and public static IP.
Use this screen to configure the Vendor IDs of the connected Set Top Box
(STB) devices, which have the Zyxel Device automatically create static
DHCP entries for the STB devices when they request IP addresses.
Use this screen to remotely turn on a device on the local network.
Use DHCP option 66 to identify a TFTP server name.
Use this screen to allow a LAN device to use any available port to access
any available service from a remote WAN device.
Use this screen to view and set up static routes on the Zyxel Device.
Use this screen to forward DNS queries for certain domain names through
a specific WAN interface to its DNS servers.
Use this screen to configure policy routing on the Zyxel Device.
Use this screen to configure Routing Information Protocol to exchange
routing information with other routers.
Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Use this screen to configure QoS queues.
Use this screen to define a classifier.
Use this screen to limit outgoing traffic rate on the selected interface.
Use this screen to configure QoS policers.
Use this screen to view statistics of QoS on WAN/LAN interface and the
status of queues.
Use this screen to make your local servers visible to the outside world.
AX/DX/EX/PX Series User's Guide
70