Table of Contents
Advertisement
4.3.10 SSB
2b
2a
Figure 4-9 SSB top shielding
1. Remove the LVDS locking bracket [1].
2. Remove all shielding fixing screws [2].
3. Disconnect the grounding wire from the mains filter [2a].
4. Slide, and lift the shielding at the top. The panel hinges at
the connector side. Caution: do not damage the EMC
shielding foam while you remove the shielding.
5. Remove the connector mounting screws [5].
6. Disconnect the LVDS cable, and all other cables.
7. Remove the mounting screw [8] from the SSB.
8. Bend the brackets [9] away (may require some force), lift
the SSB, and take it out.
4.3.11 Ambi Light Lamp Unit
Figure 4-12 Ambient light (partly shown)
1
2
F_15460_069.eps
140405
5
Figure 4-11 Connector plate
2
1
3
F_15460_066.eps
120405
Mechanical Instructions
For
PDP
Ambient lights are located in the rear cover of the TV.
1. Unplug the connectors.
2. Remove all mounting Ambient Light screws [1].
3. Move the Ambient light unit to the side [3] and take out the
unit.
3
FTP2.4A AA
9
8
Figure 4-10 SSB removal
5
4.
EN 11
F_15490_027.eps
240605
F_15500_046.eps
020805
Advertisement
Table of Contents
