Philips FTP2.4A Service Manual page 10

EN 10 4. FTP2.4A AA
4.3.3 Ambient Light Panel(s)
1
Figure 4-6 Ambient light inverter (left side)
Figure 4-7 Ambient light inverter (right side)
Later models are equipped with two Ambient Light Inverter
panels. For the earlier models with one panel, reference is
made to the FTP2.2x Service Manual for the correct
mechanical instructions.
1. Disconnect all cables from the Ambient Light Inverter
panel.
2. Remove all mounting screws [1] from the Ambient Light
Inverter panel.
3. Take out the Ambient Light Inverter panel.
4.3.4 Power Supply Panel
1. Disconnect all cables from the Power Supply panel.
2. Remove all mounting screws from the Power Supply panel.
3. Take out the Power Supply panel.
Mechanical Instructions
4.3.5
F_15460_071.eps
130405
4.3.6
1
4.3.7
F_15460_072.eps
4.3.8
130405
4.3.9
Audio Panel
Figure 4-8 Audio panel
1. Disconnect all cables from the Audio panel.
2. Remove all mounting screws [1] from the Audio panel.
3. Take out the Audio panel.
Side I/O Panel
1. Disconnect the cable from the Side I/O panel.
2. Release the clamps and take out the Side I/O panel from
its bracket.
Control Panel
1. Remove the mounting screws from the Control panel
bracket.
2. Disconnect the cable.
3. Release the clamps and take out the Control panel.
LED Panel
1. Disconnect all cables from the LED panel.
2. Remove the mounting screws from the LED panel.
3. Take out the LED panel.
Speakers
1. Remove all mounting screws.
2. After removing the cover plate (seven screws), you can
access the speakers.
3. Be sure that the foam that makes the unit airtight is not
damaged.
1
F_15460_070.eps
140405