EN 8
4.
FTP2.4A AA
4. Mechanical Instructions
Index of this chapter:
4.1 Cable Dressing
4.2 Service Position
4.3 Assy/PWB Removal
4.4 Plasma Panel / Glass Plate (Dis)Assembly
4.5 Set Re-assembly
4.1
Cable Dressing
4.1.1
Chassis
4.2
Service Position
For easy servicing of this set, there are a few possibilities
created:
•
The buffers from the packaging.
•
Foam bars (created for Service).
•
Aluminium service stands (created for Service).
Mechanical Instructions
Figure 4-1 Chassis cable dressing
4.2.1
Notes:
•
Figures below can deviate slightly from the actual situation,
due to the different set executions.
•
All photo's are made of the SDI model, however the FHP
model will not deviate much from it.
•
Be aware that the internal (gold coloured) frame is made of
conducting material. So, be cautious during electrical
measurements!
Foam Bars
Figure 4-2 Foam bars
The foam bars (order code 3122 785 90580 for two pieces) can
be used for all types and sizes of Flat TVs. By laying the TV
F_15470_004.eps
160805
E_06532_018.eps
170504