Table of Contents
Advertisement
WARNING!
If some residues remain on
the back area of tanks, soak
detergent drawer in a warm
water. Do not use tools to
clean it. Before soaking,
remove the handle by
pressing red button and slide
the handle as indicated in
the picture.
9. Make sure that all detergent residue
is removed from the upper and lower
part of the recess. Use a small brush
to clean the recess.
10. Reassembly the drawer as follows:
a. Place the handle if was
disassembled.
b. Place the bottom cover and
press till "click" sound.
c. Place the top cover on the tanks
compartment and press till "click"
sound.
d. Replace components on manual
compartment.
11. Insert the detergent dispenser into
the guide rails and gently close it till
"click" sound. Run the rinsing
programme without any clothes in the
drum.
To restore the functionality,
refill tanks with detergent
and softener. If you place a
wrong additives in the tanks,
you can easily recover it by
using the drain plug on both
side of the drawer. Before
opening drain plugs ensure
to place below the drawer a
basin or suitable containers
to collect the liquid. Ensure
to properly close the plugs
before refilling.
ENGLISH
47
Advertisement
Table of Contents
